FLASH Update: Built, Tested, and a Few Spots Still Open

Rows of finished black HMP FLASH electric motorcycles lined up inside the factory

To everyone who asked us to let you know when the FLASH is ready: thank you for your patience while this batch came together. This post shows you where things stand, what we saw at the factory, and how every bike is tested before it leaves.

30 bikes from this batch are still available to reserve, including our new White. See how many are left in each color, or hold yours now with a fully refundable deposit →

Where things stand

2 of 6 steps done. The bikes are being packed for the trip to the US.

✓
Assembled
✓
Tested
3
Packing
We are here
4
Shipping to the US
5
At our US warehouse
6
Ready for you

We went to the factory

We recently visited the factory where the FLASH is built. Here is what we saw.

Rows of finished HMP FLASH electric motorcycles lined up inside the factory
Finished FLASH motorcycles lined up at the factory.

It's one thing to read a spec sheet. It's another to walk down a row of finished bikes. Seeing them lined up was the moment this batch stopped being a date on a schedule for us, too.

At the FLASH factory.

Tested before it leaves

Before a FLASH is cleared to leave the factory, it goes through testing: a check-over against the inspection sheet, time on the inspection lane and the roller test bed, a run on the dynamometer, and a charging check. Here is some of what that looks like.

An inspector with a checklist beside a finished HMP FLASH at the factory test area
Inspection, checklist in hand.
A technician riding an HMP FLASH onto the factory inspection lane
Out on the inspection lane.
The rear wheel of an HMP FLASH on a roller test bed
Rear wheel on the roller test bed.
An HMP FLASH running on a dynamometer with a cooling fan in front
On the dynamometer.
A charging connector plugged into the charging port of an HMP FLASH
Charging check.

More from the line

A finished HMP FLASH facing the camera with more bikes lined up behind it
Finished and waiting.
Two finished HMP FLASH motorcycles side by side in the factory
Side by side, windscreens on.
A row of finished HMP FLASH motorcycles seen from the rear
The row, from the back.
A row of finished HMP FLASH electric motorcycles at the factory
FLASH, lined up and ready.
Low-angle view of FLASH wheels and tires down a row of finished bikes
Wheels on, tires on, down the whole row.
HMP FLASH badge on the side panelHMP logo badge on the front of a FLASH
The details: FLASH side badge and HMP front badge.

For our notify list

Still available in this batch

You asked us to tell you when the FLASH was ready. Some bikes in this batch can still be reserved, including our new White — and once they're gone, they're gone until the next batch.

HMP FLASH electric motorcycles in Black, Gray and White
Black, Gray, and the new White.
Color FLASH FLASH Plus
Black Fully reserved 2
available
Gray 7
available
5
available
White
New color
8
available
8
available

Available as of September 27, 2026. First come, first served — these numbers will change.

Reserve yours here

Pick your build and color. A $200 deposit holds it at the price shown — fully refundable any time before your FLASH ships, and it comes off the price.

FLASH Single-Battery

Gray · $4,999
White · $4,999

FLASH Dual-Battery

Gray · $5,999
White · $5,999

FLASH Plus Dual-Battery

Black · $6,499
Gray · $6,499
White · $6,499

Clicking Reserve adds the $200 deposit to your cart with your build noted on it. Questions? Email business@hmpbikes.com.

What happens next

Assembly and testing are done, and the bikes are now being packed. From here they ship to the US, arrive at our warehouse, and once they're checked in, they're ready for you. We'd rather get each of these steps right than rush them, so we're not putting a date on it here. When we have one we're confident in, you'll hear it from us first, by email.


Questions about the FLASH? Email us at business@hmpbikes.com.

Thank you again for waiting with us. We can't wait to hand these over.

— Peter, HMP Bikes